Grandstream Networks HT801 Administration Guide

P a g e | 30
HT801/HT802 Administration Guide
Version 1.0.13.7
- Full Static: When enabling the option full static, users need to
specify the Static IPv6 and the IPv6 Prefix length.
- Prefix Static: When enabling the option prefix static, users need
to specify the IPv6 Prefix (64 bits).
Enable Management Interface
Allows administrator to setup a Virtual Network Interface on top of the
physical interface for device management. Default is No.
Management Access
Chooses whether to access using “Management Interface Only” (Default)
Or “Both Service and Management Interfaces”
Management Interface IPv4
Address
Configures Voice VLAN Type :
• Default is dynamically assigned via DHCP
Or,
• statically configured as:
o IP Address : Default is 192.168.100.100
o Subnet Mask : Default is 255.255.255.0
o Default Router : Default is 192.168.100.1
o DNS Server 1 : Default is 0.0.0.0
o DNS Server 2 : Default is 0.0.0.0
• 802.1Q/VLAN Tag
vlan tagging : [0 – 4094]; Default is 0
• 802.1p priority value :
priority : [0 – 7]; Default is 0
Time Zone
Selects time zone to define date/time on the device.
Self-Defined Time Zone
Allows users to define their own time zone.
Allow DHCP server to set Time
Zone
Obtains time zone setting (offset) from a DHCP server using DHCP Option
2; it will override selected time zone. If set to “No”, the analogue adapter
will use selected time zone even if provided by DHCP server.
The Default setting is Yes.
Language
Configures the languages of the voice prompt and web interface, except
Spanish that it is only in IVR. Available languages: English, Chinese,
Spanish IVR.
Reset Type
Gives the administrator the option to restore default configuration on the
HT801/HT802.

Grandstream Networks HT801 Specifications

General

Brand	Grandstream Networks
Model	HT801
Category	Telephone Accessories
Language	English