WP820 Administration Guide
Version 1.0.1.15
Network Settings Page Definitions
Network Settings/Wi-Fi Settings
Enables/disables the Wi-Fi feature. The default setting is "Disable".
Allows to scan and select the available Wi-Fi networks within the range if the
Wi-Fi feature is enabled. Click on "Connect" to select the Wi-Fi network and
connect to. The ESSID will be auto filled in the ESSID filed, users can also click
on “Details” to have more details about the connected ESSID with its status,
strength, speed, frequency and security mode.
Determines the ESSID of the default Wi-Fi network. The default password is
“wp!987@dmin” and it uses WPA2PSK security access.
Determines the password for the default wp_matser ap Wi-Fi network.
Security Mode for
Hidden SSID
Defines the security mode used for the wireless network when the SSID is
hidden. Supported modes are: WEP, WPA/WPA2 PSK or 802.1x EAP.
The default setting is “None”.
Layer 2 QoS 802.1p
Priority Value (Wi-Fi)
Assigns the priority value of the Layer 2 QoS packets for Wi-Fi.
The default value is 0.
Configures Wi-Fi country code. The default value is "United States of America".
Note: Reboot is requested to take effect.
Specifies the name of the client. This field is optional but may be required by
some Internet Service Providers.
Vendor Class ID
(Option 60)
Used by clients and servers to exchange vendor class ID.
Network Settings/OpenVPN® Settings
Enables/disables OpenVPN® functionality and requires the user to have access
to an OpenVPN® server.
Note: To use OpenVPN® functionalities, users must enable OpenVPN® and
configure all of the settings related to OpenVPN®, including server address, port,
OpenVPN® CA, certificate and key. Additionally, the user must also set the SIP
To Next Page
Loading...
Need help?
General
