EasyManua.ls Logo

Grandstream Networks WP825 - Page 18

Grandstream Networks WP825
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 11: Handset Menu
Keypad
The WP810/WP822/WP825 keypad can be used by tapping on an input field. The keypad has 4 modes “Ab3”, “ABC”, “abc” and “123”. Default mode is
“Ab3”.
Call History
Display the call history: Missed Calls, Accepted Calls, Outgoing Calls or All Calls. You can add contacts to Shared Contacts directly from
call logs.
SMS
SMS stands for Short Message Service and referred to as a “text message”. With a SMS, you can send a message by pressing “New
Message” of up to 160 characters to another device or check the received ones.
Voice Mail
Select: Play voice mail messages received.
Note: Voicemail ID needs to be configured, otherwise, “select” softkeys will open configuration settings.
Diagnostics
LCD Test
LCD off
LED Test
Keypad Test
Audio Loopback
Proximity Sensor
Vibration
Verify Certificate
Settings
Account: Configure/View SIP accounts settings and account ringtone.
Call settings: Configure the account auto answer, call forward, DND and speed dial settings.
Network Settings: Configure the networks settings including Wi-Fi settings, and additional networks settings.
Basic Settings: Configure the basic settings including voice settings, display settings, Gestures and button customization, language settings
and date/time settings.
Adv. Settings: Configure the advanced settings including system upgrade, PTT/Paging settings, system security settings, syslog settings
and factory reset / reboot.
Status
Displays account status, system info, Network status and network statistics
Account status
System Info: Press to enter the sub menu for Running memory, Storage status, MAC address, System version, Recovery version, U-boot
version, Kernel version, Hardware version, PN number, Country code and Running time.
Network status: Press to enter the sub menu for MAC address, IP setting information (DHCP/Static IP), IPv4 address, IPv6 address,
Subnet Mask, Gateway, DNS server.
Network Statistics: Press to enter the sub menu for Network SSID, BSSID, IP address, Signal strength, Connection speed, Channel,
Frequency, Tx packets, Tx error packets, Tx error rate, Tx drop packets, Tx drop rate, Rx packets, Rx error packets, Rx error rate, Rx drop
packets, Rx drop rate.

Table of Contents

Related product manuals