Headset mode:
Press Dial Key to pick up the call, or “Accept” softkey (left softkey) using a connected headset.
Note:
To answer an incoming call during an established call, press Dial Key, or the Speaker Key, or the “Answer” softkey. The incoming call is answered, and the
original call is placed on hold.
Auto Answer
Users can enable Auto Answer feature to accept and automatically answer incoming calls.
If enabled, the WP810/WP822/WP825 will automatically answer incoming calls using speaker mode.
To activate / deactivate the auto answer feature:
Using LCD Menu
1. Press Menu to bring up operation menu.
2. Use arrow keys to reach Settings 🡪 Call Features 🡪 Auto answer.
3. Select which account will be enabling the Auto answer feature.
4. Set “Auto–Answer” to “Enabled” and configure the auto-answer mode and press “Save” button.
Figure 34: Auto-answer
Using Web Interface
1. Access Web GUI Interface.
2. Navigate to Account 🡪 Call Settings.
3. Set “Auto Answer” to “Yes”. (By default, set to “No”).
Ending Calls
To terminate the calls, press Hang-Up key .
Note
To Next Page
Loading...
