Do Not Disturb
You can activate or deactivate the DND mode for your accounts registered on the handset from its LCD menu. If DND mode is activated, all incoming calls
will receive busy treatment depending on your configuration (forward to voice mail, busy tone…).
To enable or disable the DND mode, Access LCD Menu 🡪 Settings 🡪 Call Features🡪 Do not disturb and set Do not disturb to Enabled.
Figure 37: DND
Enabled
Call Forward
The call forward feature will allow you to forward all the incoming calls to the desired number. Three possible call forward types are available.
Unconditional: All the incoming calls are immediately forwarded to the desired number.
Time Based: Incoming calls are immediately forwarded to the desired number based on the configured time.
Others: Incoming calls are forwarded to the desired number when Busy, when DND is enabled or when there is no response.
To enable the call forward, please refer to the following steps:
1. Press Menu to bring up operation menu.
2. Use arrow keys to reach Settings 🡪 Call Settings 🡪 Call forward.
3. Select which account will be enabling the call forwarding feature and navigate to “Call forwarding”.
4. Set “Call Forward” to “On” and select the call forwarding mode.
5. Configure the parameters of the call forward mode and press “Save” button.
Figure 38: Call Forwarding
Unconditional: All the incoming calls will be forwarded to the number set up in “All To” field.
To Next Page
Loading...
