To view the network monitor parameters, follow these steps:
1. Press Menu key to bring up operation menu.
2. Use arrow keys to reach Status menu and navigate to Network Monitor.
The following information will be displayed:
Network monitor table
Configuring the LCD Brightness and Screen Timeout
1. Press Menu to bring up operation menu.
2. Use arrow keys to reach Settings.
3. Navigate to Basic Settings, and then select Display.
4. Configures the LCD brightness, key backlight, lock screen, screen time out and the font size.
5. Press “Back” (right softkey) to save and apply the new settings.
Figure 24: LCD Display Configuration
Return to Idle Screen
Press the Power Key to quickly exit the menu and return back to the main idle screen.
When you are navigating on the handset’s menu, and you receive an incoming call, the LCD screen will automatically exit the menu and you can either accept
or reject the call, when the call is terminated, the LCD screen will return back to the idle screen.
RSSI
RSSI (Received Signal Strength Indicator) measures the strength of the wireless signal, helping in signal quality
assessment and troubleshooting connectivity issues.
Noise Level
Noise Level measures background interference, impacting signal quality and network performance. Lower noise
levels are preferable for a more stable connection.
MAC Address Displays the MAC Address of the unit.
Note
New LCD support modules have been added to the models WP822 and WP825:
WP825 support now hardware version HW 1.4A
WP822 supports hardware version HW 1.2A
To Next Page
Loading...
