Grandstream Networks WP825 - Set Voice Mail ID

To Next Page

To Previous Page

Figure 45 : UCM

Conference Room Call

put on Hold.

Voice Mail

The voice mail feature ensures that you will never miss any important messages. It permits either to leave voice mails to someone else or receive and listen to

voice mails via the handset

Set Voice Mail ID

There are 2 ways to set Voice Mail Feature Code, either using the Handset Menu or Web Interface.

Note: The Voice Mail Feature Code depends on the service provider or IP-PBX used. For example, if UCM6xxx as SIP server, the Voice Mail Feature Code is

*97.

Using LCD Menu

1. Press Menu to bring up operation menu.

2. Use arrow keys to reach VoiceMail tab.

3. Select the desired account and configure the Voicemail ID number, then press “Save” softkey.

Figure 46: LCD Menu – Voice Mail ID

Using Web Interface

1. Access Web GUI Interface.

2. Go to Accounts 🡪 Account x 🡪 General Settings

3. Configure Voice Mail Access Number.