Earpiece mode: pressing the off-hook / dial key to dial out.
Speakerphone mode: pressing the speakerphone key to dial out.
Headset mode: pressing the off-hook / dial key to dial out using connected headset.
During the call, you can switch the call mode by pressing the corresponding keys or connecting a headset.
Make a Call using a Line
Making calls require the use of SIP lines. So, you should first register the SIP account to the handset beforehand, after registering the sip lines, you can choose
between them while trying to make calls by pressing the “Accounts” button displayed on the call screen. Please refer to the following methods to make calls
using a line:
1. Enter the desired number using the keypad.
2. Toggle between the available lines by pressing the “Account” button to choose the line for making calls. (The account name will change on the screen
when press “Account” button).
3.
Press Dial key , left softkey “Call”, # (Use # as dial key” must be configured in web configuration) to initiate the call or wait for 4 seconds
and the call will be initiated automatically.
Note: Users can also initiate calls with handsfree mode using Speaker key .
4.
To terminate the call, press Hang-Up key .
Notes:
To dial from contacts list, choose a contact using navigation keys and press Dial key .
When having un-read voicemails on the handset, once accessing the dialing interface a stutter tone will be heard to notify users about voicemails that
need to be read.
The maximum length of dialed digits is limited to 30 characters.
Dialing from Call history
Users may use their call history entries to initiate calls. Please refer to following steps:
1. Press Menu to bring up operation menu.
2. Use arrow keys to reach Call History.
3. Select the desired entry and press Dial key to establish the call.
Figure 32: Dialing from Call History
Note
To Next Page
Loading...
