Rejecting Calls
To reject an incoming call, press Hang-Up key .
Call Hold/Resume
During active call, press the right softkey “Hold” to put the established call on hold.
To resume the call, press the right softkey “Unhold” while the established call is being on hold.
Figure 35: Hold/Unhold Calls
Call Waiting
This feature will notify you of a new incoming call during an established call and display the incoming call information visually on the LCD screen and a call
waiting tone will be heard. If this feature is disabled, the new incoming call will be automatically rejected.
This feature is enabled from the Web GUI:
1. Access Web Interface.
2. Go to Settings 🡪 Call Features
3. Set “Disable Call Waiting” and “Disable Call Waiting Tone” to “No”. (Default is No).
4. Press Save and Apply buttons to confirm the new settings.
Users now will be able to hear the call waiting tone and it will be visible as well on the LCD screen as displayed on the following screenshot.
Figure 36: Call
Waiting
When enabled, the User can hang up the call by placing the phone upside down.
Note
If you press on “Options” during the established call, and then make a new call to another number, the first call will be on hold automatically and users can put up
to 2 calls on hold at the same time.
To Next Page
Loading...
