Figure 47: Web UI – Voice Mail Access Number
Play Voice Mail Messages
1. Press Menu to bring up operation menu.
2. Use arrow keys to reach Voicemail tab.
3. Choose the account, press “Select” button and enter Voicemail password then you can select visually and retrieve your voice messages saved on your
voice mail and listen to each individual voicemail.
Note: this feature is compatible with UCM6xxx on v.1.0.20.6 or higher.
Figure 48: Playing Voicemail Messages
Notes
If VM is protected by a password, users can enter the password using the hanset keypad after reaching Voice Mail system. The password is defined on the
service provider or IP-PBX side.
When having un-read voicemails on the handset, once accessing the dialing interface a stutter tone will be heard to notify users about voicemails that need to
be read.
To Next Page
Loading...
