CE6000-UM-251-9370 7-38
7 ELECTRICAL ADJUSTMENTS
(4) The following menu is displayed while data is being received.
And the LED of SIMPLE will be ashed when the data is receiving.
RECEIVING
CE6000
BOOT: V1.00
FPGA: 10
And then the LED of PAUSE/MENU will be ashed
when clearing data.
And then the LED of PAUSE/MENU and the SIMPLE will be ashed
when writing data.
Note: Do not turn off the power during updating the rmware.
(5) When the upgrading is complete, the following menu is displayed.
(6) The rmware version is displayed during the initialization routine. Check the rmware version that
you upgraded.
(7) Turn off the power.
Note: Perform the “NOV-RAM clear” if the model setting was changed.
To Next Page
Loading...
