GRAPHTEC CE6000-40 Plus - Regarding the Push Roller Position Limit Screws

CE6000-UM-251-9370 6-42
6 DISASSEMBLY AND REASSEMBLY
6.2.24 Regarding the Push Roller position limit Screws
The movable range of left side and the right side push rollers are limited by the two screws.
Tighten the two screws at correct position as shown in the picture below when you had removed or
loosen those screws.
CE6000-40/60
Rear view
Right side plate
Left side plate
80 mm 57 mm
CE6000-120/120AMO/120AP
Rear view
Right side plate
Left side plate
80 mm 62 mm