GRAPHTEC CE6000-40 Plus - 6.2 Mechanical Parts

CE6000-UM-251-9370 6-7
6 DISASSEMBLY AND REASSEMBLY
6.2 Mechanical Parts
6.2.1 Front Media Sensor
How to detach the front media sensor
(1) Detach the front guide (See section 6.1.4.) for the CE6000-40 and 60.
Detach the front guide (See section 6.1.5.) for the CE6000-120.
(2) Remove the M3L12 binding head screw holding the front media sensor.
(3) Disconnect the cable from the front media sensor.
M3L12 binding head screw
Front media sensor
How to reinstall the front media sensor
(1) Reattach the front media sensor in the reverse order in which it was detached.
(2) Perform the RMS sensor and the paper sensor position adjustment when the media sensor is
replaced (See section 7.11.).