CE6000-UM-251-9370 12-4
12 Target electrical component for WEEE instruction
♦ How to remove the electrical component of the WEEE instruction
• Removing (A) Main Board
(1) Remove the three M4L6 binding head screws holding the right side cover, and then detach the right
side cover.
M4L6 binding
head screw
Right side cover
(2) Disconnect all the cables and exible cables from the main board.
(3) Remove the four M3L6 binding head screws holding the main board.
M3L6 binding head screw
Main board
(4) Detach the main board.
To Next Page
Loading...
