CE6000-UM-251-9370 2-12
2 PARTS NAMES and FUNCTIONS
Mounting the Roll-medium tray (CE6000-40 and CE6000-60 without stand)
Set the roll media tray in using the roll media tray guide rail�
Make sure the rollers on the roll media tray are on the outside on both sides.
Roll-medium trays
Roll-medium tray
guide rail
Roller
Mounting the Stock shafts (CE6000-60 with stand)
(1) Set one stopper in the stock shaft. (Keep the stopper screws slightly loose.)
Stock shafts
Stoppers
(2) Put the side with the gear of stock shafts on the left side of the CE6000 (looking from the back) and
then put the right side of stock shaft onto the media stocker.
Gear Fixed stopper
Roller
To Next Page
Loading...
