EasyManua.ls Logo

GRAPHTEC CS400 - Page 10

GRAPHTEC CS400
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– viii –
Usage precautions
Do not lift or move the unit by holding
the top cover, as doing so may damage
the unit. Always lift the unit by holding
the underside.
Side cover
Side cover
Top cover
Take care to prevent your fingers from being caught in the gap between the top cover
and the scanner unit when opening and closing the top cover.
Top cover Top cover
Always ensure that you open the top cover and remove the cushion material before using
the product. (Refer to Section 5.1, “Opening and Closing the Top Cover”.)
Scanner Warm-up
A warm-up period is not usually required for the CS400/300. However, if you plan to scan
a color document (in particular a document with many light colors), we recommend that
you allow the CS400/300 to warm up for 10 minutes before scanning the document.
<Opening the top cover>
Do not hold the rear section of
the top cover when opening it.
<Closing the top cover>
Keep your hands away from
the front of the main unit when
closing it.

Table of Contents

Related product manuals