CS400/300 2 – 1
2. PREPARATION
2. PREPARATION
2.1 Assembling the Scanner
Two persons are required for the assembly operation.
Assemble the stand before mounting the scanner unit.
(1) Assemble the caster frame and the side stay using the four screws provided. (It is not
necessary to distinguish between the left side and the right side stay because both
stays have the same shape.)
Side stay
Caster frame
Side stay
Caster frame
(2) Attach the center bar to the side stays temporarily using the four screws provided.
Side stay
Center bar
Groove
Side stay
Caster
Caster
Attach the center bar loosely. Tighten the bolts securely after the scanner unit has
been mounted on the stand.
To Next Page
Loading...
