– ii –
Safety Precautions
WARNING
Do not disassemble, repair, or remodel this scan-
ner.
• Such action may cause a fire hazard or electrical
shock.
• Such action could impair the scanner’s performance
and cause it to malfunction or break down.
If the scanner generates smoke, is abnormally hot,
emits a strange odor, or otherwise functions ab-
normally, do not continue using it. Turn off its
power and unplug its power cord from the elec-
trical socket.
• Use of the scanner in such status may result in a
fire hazard or electrical shock.
• Request repair by contacting your sales representa-
tive or nearest Graphtec vendor.
• Never try to perform repair yourself. Repair work
by inexperienced personnel is extremely danger-
ous.
If the scanner is damaged from being dropped or
other impact, turn off its power and unplug its
power cord from the electrical socket.
• Use of the scanner in such status may result in a
fire hazard or electrical shock.
• Request repair by contacting your sales representa-
tive or nearest Graphtec vendor.
• Never try to perform repair yourself. Repair work
by inexperienced personnel is extremely danger-
ous.
If water or foreign matter enters the scanner, turn
off its power and unplug its power cord from the
electrical socket.
• Use of the scanner in such status may result in a
fire hazard or electrical shock.
• Request repair by contacting your sales representa-
tive or nearest Graphtec vendor.
• Never try to perform repair yourself. Repair work
by inexperienced personnel is extremely danger-
ous.
No disassembly
Unplug the power
cord from the socket
Unplug the power
cord from the socket
Unplug the power
cord from the socket
To Next Page
Loading...
