CS400/300 3 – 11
3. PREPARING TO OPERATE THE SCANNER
3.5 Checking the Interface Connection
For Windows 2000
The procedure outlined below assumes that the CS400 is connected in your system.
Substitute CS300-10 for CS400-10 for guidelines as to how to use the CS300.
(1) Launch the Control Panel using the Start menu.
(2) The screen shown below is displayed when you click on the “Scanners and Cameras”
icon.
Ensure that “Graphtec CS400-10 or CS300-10” is indicated here.
To Next Page
Loading...
