GRAPHTEC CS400 - Installing the Scanning Master 21+ Application

CS400/300 3 – 13
3. PREPARING TO OPERATE THE SCANNER
3.6 Installing the Scanning Master 21+ Application
The Scanning Master 21+ “OPS112” is a software application for using a Graphtec scanner
to scan image data.
Operating Environment
Windows 2000 Professional/XP Professional/XP Home Edition
Installation Procedure
(The following steps are explained using the Windows 2000 windows.)
(1) Boot Windows 2000.
(2) Insert the User Guide CD-ROM containing the OPS112 program files into the computer’s
CD-ROM drive.
(3) Click the Taskbar’s Start button, then click the Run... icon.
(4) Enter the CD-ROM drive name and English\OPS112\SETUP.EXE as the name of
the file you wish to open.
If the disk is in drive E, for example, enter “E:\English\OPS112\SETUP.EXE” in the
box.
(5) Click the OK button to run the OPS112 setup program. From this point on, follow the
setup program’s instructions to install the OPS112 application.
• If the application has been properly installed, “Scanning Master 21+” will be newly listed
in the Program menu accessed from the Start button.
For more details, open the README.TXT file provided in the “Scanning Master 21+”
folder.