GRAPHTEC CS400 - Page 17

CS400/300 2 – 3
2. PREPARATION
(5) Attach the basket to the stand
Position frames 1 and 2 so that they rest on screws A and are hooked onto screws
B in order to attach the basket.
Basket
Screw A
Screw B
Screw A
Screw A
Screw B
Screw A
Frame 1
Frame 2
(6) Attach frame 3 to screws B below screws A and stretch out the basket cloth.
Screw A
Screw B
Screw A
Screw B
Frame 3
(7) Always ensure that you remove the cushion material that is included below the document
hold-down unit before using the product. (Refer to Section 5.1, “Opening and Closing
the Top Cover”.)