GRAPHTEC CSX500 Series - Page 14

C-2
CHAPTER 3 LOADING A DOCUMENT
3.1 Compatible Document Types .............................................. 3-1
Compatible Media Widths for Scanning ..............................................3-1
Compatible Media Lengths for Scanning .............................................3-1
Compatible Document Thicknesses for Scanning ......................................3-1
Compatible Media Grades for Scanning .............................................3-2
3.2 Loading a Document ....................................................3-3
How to use the document guides ...................................................3-3
3.3 Handling Documents According to their Material and Thickness ........................ 3-5
3.4 Distance Correction ..................................................... 3-7
Adjustment method ..............................................................3-7
3.5 Using the Carrier Sheet ..................................................3-8
CHAPTER 4 DAILY MAINTENANCE
4.1 Opening and Closing the Top Cover ........................................ 4-1
Opening the top cover ............................................................4-1
Closing the top cover ............................................................4-1
4.2 Cleaning the Feed Rollers ................................................4-2
4.3 Cleaning the Document support Rollers .....................................4-3
4.4 Cleaning the Gap Rollers .................................................4-4
4.5 Cleaning the Push Rollers ................................................4-5
4.6 Cleaning the Image Sensors (Transparent Contact Plates) .......................4-6
4.7 Cleaning the Sensors ....................................................4-7
4.8 Removing a Jammed Document ...........................................4-8
4.9 Scanner Adjustment .....................................................4-9
Preparation and checks ..........................................................4-9
Launching the Scanner Adjustment Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9
Calibration ....................................................................4-10
CHAPTER 5 TROUBLESHOOTING PROCEDURES
5.1 The scanner Is turned on but doesn’t operate at all ............................. 5-1
5.2 The scanner operates improperly after connection to the computer ........................ 5-1
5.3 The control panel’s red ERROR LED is lit ....................................5-2
5.4 The control panel’s red ERROR LED is flashing ...............................5-2
5.5 The document isn’t properly fed to the initial scanning position ........................ 5-2
5.6 The scanned image data is completely white or completely black ....................... 5-2
5.7 The image quality has dropped ............................................5-3
5.8 The scanned data is incorrectly aligned ......................................5-3
5.9 Smudges not appearing in the original document appear in the scanned data ............................ 5-4
5.10 The color intensity of the image data differs ..................................5-4
5.11 The document length differs from the scanned data length ....................... 5-4
5.12 Stripes or moire patterns which are not in the original document appear in the scanned data ..................................... 5-4
5.13 The scanned image data is distorted ........................................5-5
5.14 The scanned image data is patchy ..........................................5-5