EasyManua.ls Logo

GRAPHTEC CSX500 Series - Chapter 4 Daily Maintenance; Opening and Closing the Top Cover; Opening the Top Cover; Closing the Top Cover

GRAPHTEC CSX500 Series
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-1
CHAPTER 4 DAILY MAINTENANCE
4.1 Opening and Closing the Top Cover
Opening the top cover
(1) Turn off the scanner.
(2) Using both hands, push up the left and right open levers on the top cover to unlock them. While
still holding on to the levers, open the cover fully (approximately 47 degrees).
(3) When the top cover is fully open, the xing stay operates to hold the top cover in place.
Closing the top cover
(1) Press the open cover down gently with both hands to close it.
(2) Check that the left and right open levers are locked into position.
Checkpoint
If the levers are not locked correctly, the ERROR LED ashes and a scanning operation
cannot be performed.
Caution
Take care not to get your ngers caught when opening or closing the cover.
When closing the top cover, please be careful not to pinch the document guides.

Table of Contents

Related product manuals