GRAPHTEC CSX500 Series - Chapter 2 Connection and Preparations; Connecting to the Power Supply

2-1
CHAPTER 2 CONNECTION AND PREPARATIONS
2.1 Connecting to the Power Supply
Connect one end of the power cable provided to the scanner’s power inlet and the other end to an AC
power outlet of the rated supply voltage.
Power inlet
AC power outlet
Power cable
Caution
Be sure to use the cable clamp provided with the scanner to fasten the power cable in
place. Please see “Attaching and using the cable clamp” in Section 1.3, “Assembling the
Scanner” for further details.