4-4
4.4 Cleaning the Gap Rollers
(1) Turn off the scanner.
(2) Open the top cover as described in Section 4.1, “Opening and Closing the Top Cover”.
(3) While rotating the gap rollers manually, wipe them clean using a soft cloth that has been
moistened with water or a neutral detergent (diluted with water) and firmly wrung out.
Gap rollers
(4) Wipe the gap rollers once again using a soft, dry cloth to remove all the moisture.
(5) Close the top cover as described in Section 4.1, “Opening and Closing the Top Cover”.
Caution
• Take care not to get your fi ngers caught in the top cover.
• Only perform this action when the scanner is turned off.
• Please refrain from inserting cloth, etc. into the openings.
To Next Page
Loading...
