EasyManua.ls Logo

GRAPHTEC CSX500 Series - Removing a Jammed Document

GRAPHTEC CSX500 Series
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-8
4.8 Removing a Jammed Document
If a document becomes jammed in the scanner during scanning or another operation, follow the
procedure described below to remove the jammed document.
(1) Turn off the scanner.
(2) Open the top cover as described in Section 4.1 “Opening and Closing the Top Cover.
(3) If the document is jammed at the front, remove the document by pulling it forward.
(4) If the document is jammed at the rear, remove it by pulling it out from the rear of the scanner.
(5) Close the top cover as described in Section 4.1, “Opening and Closing the Top Cover.
Caution
Take care not to get your ngers caught in the top cover.
When removing a jammed document, pull on it gently to prevent damage to the
document.

Table of Contents

Related product manuals