2-13
For Windows XP
(1) Turn on the computer. (Do not connect the scanner yet.)
(2) Insert the "IMAGE SCANNER USER GUIDE CD-ROM," which came with the scanner, into the
CD-ROM drive.
(3) The “Setup menu” screen starts automatically after a while. Next, select the "Pre-install the
scanner driver" button. If the “Setup menu” screen does not start, open Windows Explorer, and
double-click on "MultiSetup.exe" within the CD-ROM folder.
(4) The screen shown below appears. Click the [Next] button.
(5) The screen shown below is displayed. Read the explanation and make sure that you understand
the contents. To continue the installation, click [Continue Anyway].
To Next Page
Loading...
