2-10
For Windows Vista
(1) Turn on the computer. (Do not connect the scanner yet.)
(2) Insert the "IMAGE SCANNER USER GUIDE CD-ROM," which came with the scanner, into the
CD-ROM drive.
AutoPlay screen will appear shortly. Select [Run MultiSetup.exe] from there.
(3) The User Account Control screen is displayed. Click [Continue] to proceed with the installation.
(4) The “Setup menu” screen starts automatically. Next, select the "Pre-install the scanner driver"
button.
If the “Setup menu” screen does not start, open Windows Explorer, and double-click on
"MultiSetup.exe" within the CD-ROM folder.
(5) The screen shown below appears. Click the [Next] button.
To Next Page
Loading...
