v
Caution
Prohibited
Specified
rating
Do not connect the scanner to a non-rated power supply.
• Use of a different supply voltage may result in electrical shock or a
fire hazard due to current leakage.
Before disconnecting or reconnecting the power cable,
be sure to turn off the scanner.
• Failure to do so may impair the scanner’s performance and cause
the scanner to malfunction or break down.
• Failure to do so may result in electric shock.
When disconnecting the power cable, be sure to hold on
to the plug, and not pull on the cable itself.
• Pulling on the cable will expose the core wires, or cause damage
such as broken wires. Current leakage from the exposed or
damaged areas may result in a fire hazard or electric shock.
Before cleaning the scanner, be sure to unplug the power
cable from the power outlet.
• Failure to do so may result in electric shock.
Do not allow dust or metallic matter to adhere to the
power plug.
• If the power plug becomes dirty, thoroughly wipe it clean.
• The use of a dirty power plug may result in a fire hazard or electric
shock.
As a general rule, do not use an extension cord.
• Use of an extension cord may result in a fire hazard or electric
shock.
If you must use an extension cord, unbundle it, and make sure that
the power plug is firmly inserted into the extension cord socket.
Make sure that the power plug can be readily unplugged
at any time, and that there are no objects placed in its
vicinity.
• Objects placed in the vicinity of the power plug will prevent its
removal in an emergency.
To Next Page
Loading...
