GRAPHTEC FC7000-130 - Page 16

FC7000-UM-251-9370 2-4
2. PARTS NAMES and FUNCTIONS
FC7000-100/130/160 (stand provided)
Assemble the stand, attach the media stocker to the stand, and then mount the plotter on the stand.
The stand and the media stocker are made up of the following parts.
Base assembly x 2 Allen wrench
(for M5 screws) x 1
Center bar x 1Stand side bar x 2 Socket head cap screw
(M5) x 20
Stock roller x 2
Media stocker bracket x 2
ASSEMBLING THE STAND
The mounting direction is different for the front loading and the rear loading models.
<Front loading>
<Rear loading>