FC7000-UM-251-9370 5-1
5. LIST OF TOOLS
5. LIST OF TOOLS
5.1 Tools
No. Adjustment Item Jig Tool
1 Pen force adjustment Cutter Pen Holder (CB09) Colex gauge (50,300,500 gf)
2 Distance adjustment Glass scale
3 Pen block height adjustment 10 mm height block
4 Firmware update PC, USB I/F cable
5 X-drive belt tension adjustment Push-pull gauge (2 kg)
6 Y-drive belt tension adjustment Push-pull gauge (2 kg)
7 Replacing the main board
Screwdriver
8 Replacing the vacuum fan
5.2 Greasing And Gluing Points
No. Grease or Glue Point Grease or Glue name Application quantity
1 Cam Shinetu silicon grease G501 Suitable quantity
2 X-drive motor pulley Shinetu silicon grease G501 Suitable quantity
3 Y-drive motor pulley Shinetu silicon grease G501 Suitable quantity
4 X-drive pulley Shinetu silicon grease G501 Suitable quantity
5 Y-drive pulley Shinetu silicon grease G501 Suitable quantity
6 Y-tension pulley Shinetu silicon grease G501 Suitable quantity
7 Y-rail, pinch roller assy sliding area Shinetu silicon grease G501 Suitable quantity
8 Y-motor drive pulley set screws Loctite 222 Small quantity
9 X-motor drive pulley set screws Loctite 222 Small quantity
10 X-drive pulley set screws Loctite 222 Small quantity
To Next Page
Loading...
