GRAPHTEC FC7000-130 - Home Dog Position; Cross Cutter Dog Position

FC7000-UM-251-9370 6-28
6. DISASSEMBLY AND REASSEMBLY
6.2.16 Home Dog Position
Home dog position
Adjust the home dog position when you remove or replace the dog as shown below.
If you have an error about the pinch roller position, confi rm position of this dog.
115 mm
Home position dog
6.2.17 Cross Cutter Dog Position
Cross cutter dog position
Adjust the cross cutter position dog when you remove or replace the dog as shown below.
91 mm
Cross cutter position dog