GRAPHTEC FC7000-130 - External Dimensions; Assembling the Plotter; Operations; Control Panel

FC7000-UM-251-9370 I
HISTORY OF REVISIONS
No. Date issued Description of revision Page Edition
1 05.06.21 First Printing All 01
2 05.08.29 The cutting mats are added for the recommended parts list. 4-1 02
3 05.08.29 Part number for the right and left media stocker bracket corrected. 10-13 02
4 05.08.31 List of item requiring readjustment corrected. 7-1 02
5 05.11.24 Part number for the bracket bottom corrected. 10-3 03
6 05.11.24 Part number for the media sensor bracket corrected. 10-7 03
7 05.11.24 Part number for the labels added. 10-12 03
8 05.12.13 Part number for the model labels corrected. 10-12 04
9 05.12.13 Part number for the X motor belt corrected. 10-7 04
10 05.12.13 Part number for the pinch roller corrected. 10-10 04
11 06.02.26 The distance adjustment pattern size changed. 7-18 05
12 06.07.04 Part number for the Y drive pulley 38 assy corrected. 10-9 06
13 06.07.04 Part number for the idler pulley assy corrected. 10-9 06
14 06.08.08 Item number for the pinch roller sensor dog corrected. 10-10 07
15 06.10.19 Part number for the idler pulley assy corrected. 10-7 08
16 07.07.11 Information of the FC7000MK added. All 09
17 07.07.13
Information of the new main board for FC7000 added. 4-1,7-1,7-31 09
18 07.10.19
Information of the sensor dog position added. 6-28 10
19 07.10.19 Correction of procedure. 7-14 10
20 07.10.19 Part number for the X motor corrected. 4-1,4-2,10-7,10-9 10
21 07.10.19 Part number for the Y motor corrected. 4-1,4-2,10-7,10-9 10
22 07.10.19 Part number for the Y drive pulley corrected. 10-9 10