FC7000-UM-251-9370 2-5
2. PARTS NAMES and FUNCTIONS
(1) Assemble the left and right stand sides. Fasten a base assembly to each of the stand side bars with four
socket head cap screws, using the Allen wrench.
Socket head
cap screws
Stand side bar
Base assembly
Stand side bar
• Assemble the stand so that the front and rear lengths of the base assembly are
the same for both the left and right stand sides.
(2) Loosely fasten the center bar to the left and right stand sides with four socket head cap screws (two on
each side), using the Allen wrench.
Socket head
cap screws
Socket head
cap screws
Center bar
Stand sides
(3) Attach a media stocker bracket to each of the left and right stand sides with two socket head cap screws,
using the Allen wrench. Mount the media stocker brackets so that each one protrudes directly above the
longer of the two base assembly lengths.
Base assembly
Stand sides
Media stocker bracket
Media stocker bracket
Socket head cap screws
To Next Page
Loading...
