GRAPHTEC FC8600-160 - Page 108

4-24 4-25
Supplement
Press the [FAST] key to change the setting
digits.
The partition length can be set from 1.0 to
2000.0 cm.
l
l
Supplement
It will return to MEDIA SETTING screen (3/3)
without changing the settings when you press the
POSITION (
◄
) key (CANCEL).
4
Press the [1] key (PANEL CUTTING).
PANEL CUTTING screen is displayed.
5
Press the [1] key (OFF).
PANEL CUTTING setting screen is displayed.
6
Press the [1] key (ON), or the [2] key (OFF).
Confirm the settings and return to the PANEL CUTTING screen.
7
Press the [2] key (DIVIDE LENGHT).
DIVIDE LENGHT setting screen is displayed.
8
Press the POSITION (
▲▼
) key and increase or decrease the
setting value.
POSITION
9
Confirm the setting and press the POSITION (
◄
) key
(PREVIOUS).
POSITION
Confirm the settings and return to the PANEL CUTTING screen.
10
Confirm the setting and press the [ENTER] key (SET).
Confirm the settings and return to the MEDIA SETTING screen (3/3).
11
Press the [PAUSE/MENU] key.
It will return to default screen.