8-4
8-5
Supplement
It will return to TOOL setting screen without
changing the settings when you press the
POSITION (
◄
) key (PREVIOUS).
Digits of the setting can be changed by pressing
the [FAST] key.
5
Press the [1] key (ON) or the [2] key (OFF).
AUTO PRE FEED is selected and return to AUTO PRE FEED screen.
6
Press the [2] key (FEED LENGTH).
FEED LENGTH setting screen is displayed.
Supplement
Feed length can be set in 0.1 m units.
Setting range is 0.5 m to 50.0 m.
7
Press the POSITION (
▲▼
) key and increase or decrease the
setting value.
8
Confirm the setting value, and press the POSITION (
◄
) key
(PREVIOUS).
FEED LENGTH is selected and return to AUTO PRE FEED
screen.
Supplement
It will return to MEDIA SETTING screen (1/3)
without changing the settings when you press the
POSITION (
◄
) key (PREVIOUS).
9
Confirm the setting and press the [ENTER] key.
Setting will be set, and it will return to MEDIA SETTING screen (1/3).
Supplement
[Pr] mark is displayed at the right of the screen
when AUTO PRE FEED is set. See "How to Use
Control Panel"
P.2-17
.
10
Press the [MENU] key.
It will return to default screen.
To Next Page
Loading...
