3-24
Settings and Measurement
uu
uu
u OTHR Settings Window
Other miscellaneous settings are made here.
Grid ..................................... The Grid parameter for display can be specified as either On or Off.
On: The waveforms are displayed on a grid.
Off. Only the waveforms (without any grid) are displayed.
Screen Saver ...................... Turns off the display if the GL450 is not operated within the specified
interval, thus prolonging the product life of the display.
Off: The screen saver does not operate.
Time: The interval can be specified as 1, 2, 5, 10, 30, or 60 minutes.
View in large print ............... This sets whether or not to switch automatically to the next group of
digital display channels.
Auto Next Screen: The display changes automatically to the next
group of channels.
Fixed: The display can only be changed manually.
Output Alarm at Burnout ..... If a burnout occurs during temperature measurement, an alarm is
generated at alarm port number 4.
Alarm Hold .......................... This parameter specifies whether or not to maintain the alarm status.
If the Alarm Hold function is enabled, the alarm status is maintained
until Alarm Cancel is selected.
Setting Selections available Setting method
Grid Off, On ENTER→Select→ENTER
Screen Saver Off, 1, 2, 5, 10, 30, 60 min ENTER→Select→ENTER
View in large print Auto Next Screen, Fixed ENTER→Select→ENTER
Alarm Hold Off, On ENTER→Select→ENTER
Alarm Cancel – ENTER
Output Alarm at Burnout (AL4) Off, On ENTER→Select→ENTER
Start/Stop Confirmation Message Off, On ENTER→Select→ENTER
Power On Start Enable, Disable ENTER→Select→ENTER
Room Temp. Compensation Internal, External ENTER→Select→ENTER
AC Line Frequency (External Filter)
50/60Hz (Off, On) ENTER→Select→ENTER
Burn Out Off, On ENTER→Select→ENTER
Temp. Unit °C, °F ENTER→Select→ENTER
Date/Time Date, time settings ENTER→Select→Confirm
Language Japanese, English (US), English (UK) ENTER→Select→ENTER
Return to default settings
Yes, No ENTER→Select→ENTER
To Next Page
Loading...
