2-10
Checks and Preparation
2.8 Connecting to a PC
Use the USB, LAN Interface to connect the GL900 to a PC.
Connection Using a USB Cable
Use the USB cable to connect the GL900 to a PC.
CHECKPOINT
If the USB cable is used, the USB driver must be installed in your PC. Please refer to "Application
Software Instruction Manual" for the installation procedure. There is "Application Software Instruction
Manual" in an attached CD-ROM.
CAUTION
The USB connector is adjacent to the LAN connector. Make sure the cable is inserted into the correct
connector.
䢇 Use an A-B type USB cable to connect the GL900 to a PC
A connector B connector
USB cable
To Next Page
Loading...
