4-2
Specifications
4.1 Standard Specifications
Standard Specifications
No Condition Normal
During battery recharge
1 When the LCD is on 30VA 42VA
2 When the screensaver is operating 25VA 37VA
DC voltage
Condition
Normal During battery recharge
+24V
When the LCD is on 0.62A 1.0A
When the screensaver is operating
0.48A 0.88A
+12V
When the LCD is on 1.16A
Recharging not possible
When the screensaver is operating
0.92A
+8.5V
When the LCD is on 1.82A
Recharging not possible
When the screensaver is operating
1.36A
No
1
2
3
4
5
6
Item Description
Number of analog channels Fixed to 8 channels
External input/output Trigger input
Logic input 4 channels or Pulse input 4 channels
Alarm output
PC inteface Ethernet (10BASE-T/100BASE-TX)
USB (High Speed supported) provided as standard features
Internal memory devices Internal RAM : Approx. 64 MB
Internal flash memory : Approx. 256 MB
USB memory slot (High Speed supported) provided as standard features
Data backup function Setup condition: EEPROM; Clock: lithium secondary battery
Clock accuracy ±0.002% (accurate within about 50 seconds per month)
(23°C environment)
Operating environment 0 to 40°C, 5 to 85% RH (15 to 35°C when using batteries)
Withstand voltage Between each input channel terminal and GND terminal : 1 minute at 1000 Vp-p
Between input channel terminals : 1 minute at 1000 Vp-p
Power supply AC adapter : 100 to 240 VAC, 50/60 Hz
DC input : 8.5 to 24 VDC
Batery pack (option) : 7.4 VDC (2200 mAh)*
2
Power consumption • AC current consumption (when using the AC adapter provided as a standard
accessory)
• DC current consumption
* Normal status is when LCD brightness is set to MAX.
External dimensions 232 x 150 x 80 mm
Weight*
1
1.1 kg
Vibration-tested conditions Equivalent to automobile parts Type 1 Category A classification
*1 Excluding the AC adapter and batteries
*2 Two battery packs (B-517: option) are required for the GL900 to run on batteries.
For details, see Section 2.9, "Using the Battery Pack (B-517: Option)".
To Next Page
Loading...
