GRAPHTEC GL900 - Function Specifications

Specifications
4-5
4.2 Function Specifications
Function Specifications
Trigger Functions
Item Description
Display screen Waveform screen + Digital screen
Expanded Waveform screen
Digital screen
X-Y display
* Even during data capture, you can open menus (to check whether setting is possible).
* Screens can be key-toggled.
EU (scaling function) 4 points can be set for each channel.
Review function Data replay during data capture
Calculation Types of statistical calculation : Average, Max, Min, Peak, RMS
Number of operations : Maximum of 2 can be set simultaneously.
Method : Data between cursors specified (during data replay)
Search functions Function : Search the captured data for the required number of points
Search type : Search of channels by levels
Search by logic pulses + combinations
Search by alarm generation
Annotation input function Function : A comment can be input for each channel.
Supported characters : Alphanumeric and kana characters
Number of characters : 11 (Up to 8 characters are displayed)
Item Description
Timer mode Off, Date and Time, Every Day Cycle, Every Hour Cycle
Repeat trigger Off, On
Trigger types Start : Data capture starts when a trigger is generated.
Stop : Data capture stops when a trigger is generated.
Trigger settings Start : Off, Level, External
Stop : Off, Level, External, Time
* A level can be set for each channel.
Level judgment modes Analog :
↑
H,
↓
L, Window IN, Window Out (Tolerance ±1%)
Logic :
↑
H,
↓
L
Pulse :
↑
H,
↓
L, Window IN, Window Out
Channel combinations Level OR, Level AND, Edge OR, Edge AND