3-2
Settings and Measurement
3.1 Window names and functions
1. Simplified message display
Displays the system operation status.
* For details on data capture such as timer, trigger, and repeat, see page 3-27.
* For details on memory to be used for data capture, see page 3-24.
CAUTION
Do not turn off the power while the simplified message is "Capturing and Replaying", "Capturing to
Internal RAM", "Capturing to Internal Flash Memory", "Capturing to USB Memory", or "Auto Saving"
(those with an asterisk (*) in the above list). Otherwise, the captured data will be destroyed. Make sure
that the message is completely gone (wait for 2 or 3 seconds) before turning off the power.
2. Time/DIV
Displays the current time scale.
1. Simplified message display
2. Time/DIV
8. AC/Battery status display
7. Clock lamp
13. File name display
14. Scale lower limit
15. Waveform display
16. Scale upper limit
17. Data capture bar
12. Pen display
11. Alarm display
3. USB memory access display
4. Internal flash memory access display
5. Key lock lamp
6. Remote lamp
9. Digital display
10. Quick settings
: Startup status or data is not being captured
: Waiting for generation of a trigger after measurement has started
: Waiting for the time set on the timer
: Capturing data and replaying captured data
: Capturing data to the internal RAM of the GL900
: Capturing data to the internal flash memory of the GL900
: Capturing data to USB memory
: Auto-saving data
(Data captured in the internal RAM is being saved to the internal
flash memory or USB memory.)
: Replaying data in the internal RAM of the GL900
: Replaying data in the internal flash memory of the GL900
: Replaying data in USB memory
: Waiting for the specified repeat time to elapse
To Next Page
Loading...
