EasyManua.ls Logo

GRAPHTEC GL900 - Using the Battery Pack (Option); Mounting the Battery Pack

GRAPHTEC GL900
97 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-12
Checks and Preparation
2.9 Using the Battery Pack (B-517: Option)
The B-517: option battery is the only battery type that can be used with the GL900.
Two battery packs need to be mounted when you have the GL900 run on batteries.
You can also mount only one battery pack when you charge it (using the AC power source). At this time, the
battery pack can be mounted on either the right or left.
The running time using batteries is about 2.5 hours when the screen saver is operating.
Mounting the Battery Pack
(1) While lightly pushing the grip of the battery cover, slid the cover in the direction indicated by
the arrow.
(2) Attach the battery pack (B-517: option).
CAUTION
When you have the GL900 run on batteries, be sure to mount two battery packs with the same charge
level.
Do not use a new battery with an old battery at the same time.
If you are not sure about the amount, charge each battery and then attach full-charged two battery
packs.
(3) Attach the battery cover.
2
1
2
1

Table of Contents

Other manuals for GRAPHTEC GL900

Related product manuals