3-16
Settings and Measurement
(4) Replaying
Displays captured data.
Available operation during replaying.
This area displays voltages, etc. of points
indicated by Cursor A or B or the selected cursor.
This area displays measuring time, etc. of points
indicated by Cursor A or B or the selected cursor.
SPAN/TRACE/POSITION The SPAN/TRACE/POSITION key is used to change settings.
Menu operations during data replay The MENU key is used to move the cursor, search data and set calculation.
Moving cursors The CURSOR key is used to switch between cursors A and B.
The or keys are used to move the cursors
File operations The FILE key is used to save data in the internal RAM to the internal flash
memory and USB memory.
To Next Page
Loading...
