GRAPHTEC GL900 - Cursor(Alarm Clear)

3-12
Settings and Measurement
12. CURSOR(ALARM CLEAR)
This key has different roles in different operation statuses.
<When replaying captured data>
This key is used to toggle between cursors A and B during replay.
• Waveform + Digital Screen
Cursor A is in blue when selected or in gray otherwise.
Cursor B is in red when selected or in gray otherwise.
The trigger point is indicated with a green line.
• X-Y Display Screen
<When alarm generated>
When the alarm setting is "Hold generated Alarm", the maintained alarm is
cleared.
Cursor A
Cursor ACursor B
Cursor B
Cursor A
Cursor ACursor B
Cursor B
Alarm-generated channels
Alarm output terminal status
• Black : Alarm is cleared
• Red : Alarm is issued