3-10
Settings and Measurement
<USB Drive Mode>
In USB Drive Mode, the internal memory is recognized by the PC as external
storage media.
With the internal memory recognized as a removable disk, files can be easily
transferred, deleted, or otherwise manipulated on it.
(1) Use a USB cable to connect the GL900 and a PC.
(2) While pressing the GL900 START/STOP key, turn the power ON.
(3) The external storage media is recognized by the PC and data exchange
becomes possible.
* In USB Drive Mode, the display on the GL900 is as shown below.
CAUTION
• To cancel the USB Drive Mode, reboot the MT100.
• All operations, including data capture and replay, will be disabled during USB
Drive Mode.
10. REVIEW
This key is used to replay captured data.
• During Free Running, replays the last captured data.
If no data has been captured yet because it is just after the power-on, no data is
replayed (a message "No data captured" comes up).
* While capturing data, recently captured data is replayed (data capture is
continued).
To Next Page
Loading...
