Settings and Measurement
3-9
7. ENTER
This key is primarily used for the following operation:
• To finalize setting items during menu configuration or open submenus.
8. FAST FORWARD keys (KEY LOCK)
These keys are primarily used for the following operation.
• To move the cursor at high speed during replay.
• To change the operation mode in the file box.
• To set key lock (Hold down the left/right FAST FORWARD keys for at least two
seconds. press again to unlock) A password for canceling the key lock can be
specified.
For details, see page 3-46.
9. START/STOP (USB Drive Mode)
This key is used for the following two operations:
<Starting and stopping measurement>
• Starts capture during Free Running.
• Stops capture during capture.
To Next Page
Loading...
