GRAPHTEC GL900 - Capturing

Settings and Measurement
3-15
(2) Capturing
During data capture, data is captured into the Internal memory or USB device.
You cannot use the MENU key to change the setting.
Operations available for change during capturing
(3) Capturing and Replaying
You can replay data during capture.
You can use the Direction keys ( ) to move the cursor to captured data to check digital values.
Operations available during Capturing and Replaying
Time of Capturing
Capture file name
Capture time
Note: "+++++:++:++" is displayed
when the capture time is long.
This area displays voltages, etc. of points
indicated by Cursor A or B or the selected cursor.
This area displays measuring time, etc. of points
indicated by Cursor A or B or the selected cursor.
SPAN/TRACE/POSITION The SPAN/TRACE/POSITION key is used to change settings.
Display mode The DISPLAY key is used to change the display mode.
Capturing and Replayling The REVIEW key is used to replay captured data at the same time.
Moving cursor The CURSOR key is used to switch between cursors A and B.
The
or keys are used to move the cursors.