GRAPHTEC GL900 - Page 55

Settings and Measurement
3-23
(2) DATA settings
This menu is used to specify setting items related to capture and calculations.
<Capturing data to the internal RAM> < Capturing data to the internal flash memory or USB memory >
Data capture file name
(2)-1 Sampling Interval
Specifies intervals used to capture data.
Setting Selection
Sampling Interval 10, 20, 50, 100, 200, 500 us; 1, 2, 5, 10, 20, 5
Data capture destination Internal RAM, Internal Flash Memory, USB Memory
[Internal RAM] Number of capture points 1000 to 1000000
Auto Save Off, On
[On] File Name * See the following section on the data capture
[Internal Flash Memory] File Name * See the following section on the data capture
or
[USB Memory]
Function 1 Off, Average, Max, Min, Peak, RMS
Function 2 Off, Average, Max, Min, Peak, RMS
[xxx] shows a case in which xxx is selected from available selections.
Setting Selection
Folder (File) Destination : MEM, USB1
Folder : Text input (if it is automatically named)
File : Text input (if it is user-defined)
Name Type Auto or User
File Format Binary (GBD), Text (CSV)
Capture destination Selections available
Internal RAM 10, 20, 50, 100, 200, 500us; 1, 2, 5, 10, 20, 50, 100, 200, 500ms; 1, 2, 5, 10, 20, 30s; 1min
Internal flash memory 1, 2, 5, 10, 20, 50, 100, 200, 500ms; 1, 2, 5, 10, 20, 30s; 1min
USB memory 1, 2, 5, 10, 20, 50, 100, 200, 500ms; 1, 2, 5, 10, 20, 30s; 1min