Settings and Measurement
3-25
(2)-5 File Name
Specifies the name of a file or folder to which you want to capture data or auto-save data.
<If the Name Type is Auto> <If the Name Type is User>
CAUTION
• If you perform data capture with Name File set to Auto, data will be saved in a folder automatically
created with the date as its name.
• If you perform data capture repeatedly with Name File set to Auto, the amount of time taken to begin
measurement will increase as the number of files increases.
In such a case, create a new folder as an alternative destination.
• When you save files, create a folder and then save the files in the folder.
Regardless of the remaining capacity, if you try to save files in the root directory, due to file restrictions
you may not be able to save files.
•
The displayed Capture Time may vary according to the sampling interval or number of capture channels.
Setting Description
(1) Folder Specifies a folder to which you want to capture (or save) data. For details, see the file box on
page 3-39.
(2) File Specifies a file to which you want to capture (or save) data. For details, see the file box on page
3-39.
(3) Name Type Sets how a data file is named.
Auto :
Automatically gives a name to a file.
Example: 20050101-123456_UG.GBD
Number part ....... Date and time at which a file was created
* In this example, the date is January 1, 2005 and the time is 12:34:56.
UG ..................... User number for data capture
UG (Guest)
U1 (User 1)
U2 (User 2)
GBD ................... Data format
GBD (Binary format)
CSV (Text format)
User : Captures data to a file with a user-defined name.
(4) File Format Sets the file format in which you want to save data.
GBD :
Creates a data file in Graphtec proprietary binary format.
* Prevents tampering of data.
CSV : Creates a data file in a text format.
* Cannot be replayed on the GL900.
To Next Page
Loading...
