GRAPHTEC GL900 - Page 59

Settings and Measurement
3-27
(3) TRIG Settings
This menu is used to specify trigger conditions and alarm settings.
Setting Selections available
Timer mode Off, Date and Time, Every Day Cycle, Every Hour Cycle
[Date and Time] Start side source setting Date January 1, 2005 to December 31, 2035
Time 00:00 to 23:59 (Hour:Minute)
Stop side source setting Date January 1, 2005 to December 31, 2035
Time 00:00 to 23:59 (Hour:Minute)
[Every Day Cycle] Start side source setting Time 00:00 to 23:59 (Hour:Minute)
Stop side source setting Time 00:00 to 23:59 (Hour:Minute)
[ Every Hour Cycle ] Start side source setting Time 00:00 to 59:59 (Minute:Second)
Stop side source setting Time 00:00 to 59:59 (Minute:Second)
Start side source setting Off, Level, External Input
[Level] Combination Level OR, Level AND, Edge OR, Edge AND
Mode Analog : Off,
↑
H,
↓
L, Win In, Win
Logic : Off,
↑
H,
↓
L
Pulse : Off,
↑
H,
↓
L
Level Numeric value setting
Stop side source setting Off. Level, External Input, Time
[Level] Combination Level OR, Level AND, Edge OR, Edge AND
Mode Analog : Off,
↑
H,
↓
L, Win In, Win
Logic : Off,
↑
H,
↓
L
Pulse : Off,
↑
H,
↓
L
Level Numeric value setting
[Time] 0000:00:01 to 9999:59:59 (Hour:Minute:Second)
Pre-trigger 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100%
Repeated capturing Off, On
Repeat interval 0000:00 to 9999:59 (Hour:Minute)
Timer trigger information Display Information
Alarm Alarm Hold On, Off
level Mode Analog : Off,
↑
H,
↓
L, Win In, Win Out
settings Logic : Off,
↑
H,
↓
L
Pulse : Off,
↑
H,
↓
L, Win In, Win Out
Level Numeric value setting
Output 1, 2, 3, 4
[xxx] shows a case in which xxx is selected from available selections.